Hey, everyone! I hope you guys are having a great day, today I'm excited to show you how to make your bicycle look cooler by pimping it up with some LEDs and making it look almost like one of those lit bikes from the movie "Tron". I came up with a new series called "Pimp my Bicycle", and I will probably be posting more videos for this series. Enjoy and stay tuned for my next video! :-)

Materials:
Headlight:
Plastic container lid, 2-inch PVC end cap, 2-inch clear plastic circle, aluminum foil (or use shiny origami paper), 2 hose clamps (or you can use zip ties), thick washer, flat washer and hex nut, tap-washer, bolt and nut, 30cm of copper wire (stripped wire), nine white 3.5V bright LEDs, 2 pieces of 10cm wire, 3.7V lipo battery with connector, small On/off switch.

Tail lights:
10x3cm laminated thin cardboard, 3 red LEDs, one 3v resistor, 3 white plastic bottle caps, 3 red reflective covers for tail lights (found in LED collar safety lights), copper wire, 3.7V lipo battery, On/off switch, 4 zip ties, two 10cm long wires.

Wheel lights:
Half inch PVC clear transparent hose (length depends on the perimeter of your bike's wheel), 22 LEDs per wheel (11 LEDs of one color and 11 of another color), 2 copper wires, 3V battery supply, On/off switch, masking tape, and a 3V resistor (only if you are using a battery higher than 3V).

Chassis lights: Half inch PVC clear transparent hose, 10 red LEDs, 3V battery supply, Switch, masking tape, copper wire, and 2 electrical wires.

Music credits:
Jim Yosef - Eclipse [NCS Release
Free Download / Stream: ncs.io/eclispe
   • Jim Yosef - Eclipse | House | NCS - Copyri...  

Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
Free Download / Stream: ncs.io/mortals
   • Warriyo - Mortals (feat. Laura Brehm) | Fu...  

#LEDbicycle #pimpmybike #DIY