Buy Now!
New Tie Rod from 1AAuto.com trq.video/ia-1ASTE00907

This video shows you how to install new outer tie rods from TRQ on your 2012-2015 Honda Civic. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 2013 Honda Civic EX 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Honda Civic
2013 Honda Civic
2014 Honda Civic
2015 Honda Civic

Tools you will need:
• 18mm Wrench
• 24mm Wrench
• 19mm Socket
• Locking Pliers
• Needle Nose Locking Pliers
• Pliers
• Wire Cutters
• Ratchet
• Torque Wrench trq.video/obSB-1AXAA00044
• Cloth Rags
• Copper Anti-Seize
• Gloves trq.video/ocmc-1AXSS00048
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Pick trq.video/oajX-1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.